![](/images/new-backgrounds/1310064/31006439x1.webp)
DIRECTORY
You can store up to 10 names (up to 15 characters) and numbers (up to 24 digits) in the directory for quick dialing. If a number exceeds 24 digits, you can program it in parts, and then chain dial the number.
Store a number in the directory
To program a number to memory:
1.Make sure the phone is OFF (not in TALK Mode).
2.Press MEM key to start the Memory Programming Mode. “MEMO
#
3.Select the desired memory location (0 – 9) or use the CID/VOL or
keys to find an empty memory location.
4.Press the MEM key again. The screen shows “ENTER NAME”
5.Use the digit keys to enter the name. The cursor advances 1 space after each key press. Within 1 second, you can press the same key again to select another character. If you make a mistake, press CH/DEL to delete previous characters one by one.
Key Press | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
1st – 5th press |
| A | D | G | J | M | P | T | W |
2nd – 6th press | – | B | E | H | K | N | Q | U | X |
3rd – 7th press | * | C | F | I | L | O | R | V | Y |
4th – 8th press | ! | ( | ) | $ | ’ | ; | S | ? | Z |
6.Press MEM again to save the name. “ENTER TEL NUMBR” shows on screen.
7.Use the digit keys to enter the desired telephone number. If you make a mistake, press CH/DEL to delete previous digits one by one, then enter the correct digits. If you wish to add a pause, press PAUSE two times at the desired location. Be sure to press it twice, or you will enter a # (number sign) and not a pause. Each pause counts as 1 digit in the dialing sequence. Or you can store redial number in the directory by pressing REDIAL (Note: If the redial number is longer than 24 digits, it can not be stored into the memory.).
8.Press MEM again to save the number. “ANIMATION 0” shows on screen. “0” means the animation feature is disabled.
20