TV Adjustment and Setup (Continued)

QuickTips

■Under weak stereo signal conditions, you may receive better quality sound in the “Mono” position.

■Surround sound expands the sound effect while receiv- ing MTS stereo signals.

■Pressing the RESET key will clear all customized settings. The TV will automatically start Channel Search and clear settings.

■Channels deleted from scan memory can be selected with the number keys.

■Restoring deleted channels, use the on-screen menu to manually add channels or start CH. Search from the menu. It make take a few minutes to search thru the available channels. or press the RESET key.

Need help?

Visit our Web site at

www.sanyoctv.com

or Call 1-800-877-5032

Adjusting Sound

Select desired sound setting: Audio, Bass, Treble or Surround. 1. Choose Audio from the Sound menu options.

2. Use the ▲/▼ keys to select the sound setting you want to change. (Red arrow indicates selected highlighted option.)

3.Use the – /+keys to adjust settings: Stereo, Mono or SAP.

Notes: Stereo and SAP must be part of the broadcast signal.

The TV will automatically reset to stereo if unplugged or a power failure occurs.

4. To adjust the other sound features: Bass, Treble, or Surround, simply follow steps 2~3 above.

Adjusting the Channel TuningResetting the Antenna Mode and Channel Search

Resetting the Antenna or CH. (Channel) Search is required only if additional channels become available, such as moving to another city or having a cable service installed.

1.Choose Antenna or CH. Search from the Channel menu

options. (Red arrow indicates selected menu option.)

2. Use the – /+keys to change Antenna settings: Cable or UHF/VHF. For CH. Search, press the + key. The TV will automatically start searching for your channels. It will take the TV several minutes to complete the search.

Adding or deleting Channels

1. Choose CH. Memory from the Channel menu options. (Red arrow indicates selected highlighted option.)

2. Press the + key to select the channel number entry area.

3. Enter the channel number you want to add or delete (example): C34. For cable channels above 99, press and hold the 1 key until C1– – appears. Then enter the other two numbers.

4. Press the + key to change the present setting. Example: Added will change to Deleted. This takes about three seconds. During that time, the word “Added” or “Deleted” will become white.

5. Use the 0~9 or ▲/▼ keys to chose other channels to delete or add, or press Menu key to exit.

12 Adjusting Sound / Channel Tuning