V-Guide (Parental Control) Information

QuickTips

■When in the V-Guide menu system, the

–/+ keys allow you to navigate between the ratings and the options menu.

■Blocking TVY7 does not block higher ratings.

■You can block a content rating such as TVPG-V and still be able to watch TVPG programs with ratings of S-L-D provided TVPG is unblocked (U).

■To temporarily unblock or view Blocked (B) programs, set V-GUIDE to OFF, or press the RESET key twice to clear all Blocked (B) ratings and other customized settings.

Need help?

Visit our Web site at

www.sanyoctv.com

or Call 1-800-877-5032

NOTE: THIS FEATURE IS DESIGNED TO COMPLY WITH THE UNITED STATES OF AMERICA’S FCC V-CHIP REGULATIONS. THEREFORE, IT MAY NOT FUNCTION WITH BROADCASTS THAT ORIGINATE IN OTHER COUNTRIES.

This Sanyo television is equipped with an electronic V-Chip to interpret MPAA and TV Parental Guidelines rating codes. When these codes are detected, the TV will automatically display or block the program, depending upon choices you make when setting up the V-Guide system.

The V-Guide system contain both age-based and content-based settings. This gives parents discretionary ways of choosing appropriate material for their children to view.

Content ratings are represented by the initials D (Suggestive Dialog), L (Adult Language),

S (Sexual Situations), V (Violence), and FV (Fantasy Violence). When programming contains any or all of these conditions, these letters become part of the icon that is displayed on the TV screen.

A rating icon will generally appear in the upper left hand corner of the TV screen for about fifteen seconds.

V-Guide Operation

Use this feature to supervise television viewing for young children. This television can be set to automatically block programs with content you deem as inappropriate for your children to view.

The ability of the television to block the reception of specific programming content depends upon several conditions: 1) The program must be rated, 2) Networks must broadcast the rating

code data, 3) Cable companies must transmit the rating code signal, and 4) The TV must be properly setup to decode the signal.

Setting a Rating

1. Press the V-GUIDEkey on the remote control to display menu.

2. Press the – /+keys to switch V-Guide ON.

3.Press the + key to access Ratings: MPAA

Ratings or TV Ratings. (➡ Arrow indicates selection.)

Setting a MPAA Movie Rating

4.Use the ▲ / ▼ keys to block ratings: G, PG,

PG-13, R, NC-17, and X.

5. Press the + key to set the BLOCKED rating. (√ Check mark indicates Blocked rating.)

Note: The TV will automatically block (B) ratings above or unblock (U) ratings below selection. For example, if you block rating R, NC17 and X will be blocked as well.

14 V-Guide (Parental Control)