Sanyo CLT1554, CLT2054 Using the Detachable TV Tilt Stand, Power Connection, Positioning the LCD TV, Removing the TV Tilt Stand, 10º 5º, CAUTION, CAUTION, Tools Needed:

Getting Started

Positioning the LCD TV

Always use an appropriate table or stand when positioning your TV. Allow enough space to tilt the TV. For best viewing, avoid locating the TV where direct sunlight or indoor lighting will fall on the screen. (Note: CLT1554 measurements are in the parenthesis.)

Power Connection

❶Insert AC Adaptor into the DC input terminal on the TV.

❷Insert AC power cord into Adaptor; then insert the plug fully into a 120V, 60Hz, AC power outlet.

603.8	76.7
(500.2)	(74.5)

	388.8	(304)	413.2	(328.4)
AS
262.0	24.4			184.0
(262.0)	(24.4)			(184.0)
Using the Detachable TV Tilt Stand

AV2	AV1
	S-VIDEO
V	V

LL

(MONO) (MONO)

R	R
AV3
	Y
L	Pb
R	Pr

DC IN
TUNER	POWER
VHF	(DC IN	19V)
UHF
CATV
DC IN
POWER
(DC IN 19V)

BACK OF TV	AC
	ADAPTOR
DC POWER

INPUT

TERMINAL

❶

❷

To change the viewing angle of your	10º 5º
LCD TV, position your hand on the
top and hold the stand firmly, then
tilt the LCD screen forward or back-
ward. CAUTION: Do not position
hand under the screen while tilting
the TV forward.

Note: Maximum tilt is 5º to the front and 10º to the back.

Removing the TV Tilt Stand

Tools Needed: Phillips screwdriver

Important Note: Position TV face down on a padded or cushioned surface to protect the screen and finish.

1.Remove the screw from the stand back cover.

2.Remove four (4) screws from the metal bracket. CAUTION: Hold the stand firmly as you remove the last screw.

3.Carefully remove the TV stand.

AC CORD

❷

POWER OUTLET

[HOUSEHOLD]

Positioning LCD, Using Tilt, Removing Stand, and Power Connection 5