Sanyo DVP-P1U manual Specify the image to print and the num- ber of prints

PRINTING

2 Specify the image to print and the num- ber of prints.

1Press the MENU button and move the menu pointer [g] to [Image Number].

2Press the [+] or [–] button to select the image to print.

hWhen [+] or [–] is pressed, the Index

Navi moves. Use the Index Navi to specify the image you wish to print.

hIf you press the [+] and [–] COPIES buttons at the same time for about 2 seconds, the number of prints speci- fied in step (3) is applied to all the images.

3Press the [+] or [–] COPIES button to specify the number of prints.

hThe number of prints for the currently selected image (Quantity) and the total number of prints (Total) are shown on the LCD monitor.

hA maximum of 19 prints can be speci- fied.

hYou can press the CANCEL button to cancel the settings.

2-2

2-1

Mode

Image Number

Setting

3

2-3

2-2

2-1

2-2

Index Navi

2-3

Number of prints

	2-3
		Total number of prints
3
	Press the PRINT button.

hThe PRINT indicator lights, and printing begins.

hDuring printing, the remaining number of prints (Remains) is shown.

NOTE

If the total number of prints indication does not show more than [99]...

iThe indication for the total number of prints cannot show more than 99. However, you can specify more 100 or more prints.

iWhen the specified total number of prints is 100 or more, the total number of prints indication appears as [w]. During printing the remaining number of prints indication also appears as [w]; when the remaining number of prints becomes 99, the correct number is shown on the display.

You can specify borderless prints, date imprint, and sharpness printing (see page 42).

English 33