REPLACEMENT OF BATTERY
Location of a nickel-metal-hydride battery
This unit is provided a
The high voltage components are enclosed in the front cover. The cover should be removed by a qualified engineer or a service personnel only to prevent the electric shock.
Removal of nickel-metal-hydride battery
1.Turn off the power switch, battery switch and disconnect the power supply plug.
2.Lift the front cover. (Fig. 2)
3.Remove 2 screws fixing the battery with a screw driver. (Fig. 3)
4.Disconnect the connector and take out the battery. (Fig. 4)
5.Follow the procedure for recycling or proper disposal.
Electrical box |
|
|
| Battery |
|
Fig. 1 |
| Fig. 2 |
Battery | Battery |
|
Battery | fixture |
|
fixture |
| |
|
| |
Screw |
| Connector |
Fig. 3 | Battery | Fig. 4 |
|
|
18
