TEMPERATURE RECORDER (OPTION)
5.Remove 2 rubber caps (outside and inside) on the access port on the back of the freezer and also remove the insulation in the port. Fig. 4
6.A recorder sensor is to do fix with supplied nylon
clips the inside wall by screw. | See fig. 5. |
7.Replace the insulation into the access port and cover the port completely with the rubber caps. Seal
the access port with a silicon | See fig. 6. |
8.Operate the freezer until the chamber temperature gets to the set temperature. Check the recorded temperature and chamber temperature displayed on the control panel. Adjust the zero adjustment volume on the temperature recorder so that the recorded temperature can corresponds with the displayed temperature if they are not compliance each other
Access port |
Fig. 4 |
Clip (Big) | Fig. 5 |
|
|
Fig. 6
26
