Sanyo PDG-DXL100 owner manual Introduction, level of OSD for the OSD main menu

Introduction

Note

To quick change remote control code, press “MENU” and “IMAGE” buttons about 10 seconds at the same time.

5	MENU	Press “MENU” to launch the On-
		screen display (OSD), back to the top
		level of OSD for the OSD main menu
		operation
6	IMAGE	Select the Image mode from Presenta-
		tion, Movie, sRGB, Bright and User.
7	INPUT	Press “INPUT” to choose RGB,
		SCART, Component, S-Video, Com-
		posite and HDMI sources.

8D.ZOOM - Zoom out the projector display.

9	KEYSTONE	Adjust the image to compensate for
	+/-	distortion caused by tilting the projec-
		tor.
10	LAMP CON-	Select the lamp mode. (refer “ECO
	TROL	Mode” function)
11	AV-MUTE	Momentarily turn off/on the audio
		and video.

12COMPUTER 1 Press “COMPUTER 1” to choose Computer in 1/Component in 1 con- nector.

13COMPUTER 2 Press “COMPUTER 2” to choose Computer in 2/Component in 2 con- nector.

14	FREEZE	Pause the screen image. Press again to
		resume the screen image.
15	Four	Use or or or to select items or
	Directional	make adjustments to your selection.
	Select Keys
16	ASPECT	Display the “Aspect Ratio” section of
		the on-screen display menu to select
		the desired aspect ratio.
17	D.ZOOM +	Zoom in the projector display.
18	INFORMA-	Display information menu.
	TION

10

English