Sanyo PDG-DXL100 owner manual PJLink Notice, Appendices, English, close return, some countries

Appendices

Note

Enter with ASCII

64-byte capital char-

acters and one-byte characters.

4.Type the commands, refer to right table, to control the projector and then press “Enter” key for termina- tion. For example, type “C00” which is a command to turn on the projec- tor, and press “Enter” key. Confirm the projector is turning on.

To disconnect the communication, press “Ctrl” key and “]” key at the same time, type “close” and then press “Enter” key on the Keyboard.

> close [return]

Command list table

Command	Function
C00	POWER ON
C01	POWER OFF
	(Immediate POWER OFF)
C09	Volume +
C0A	Volume -
C0B	SOUND MUTE ON
C0C	SOUND MUTE OFF
C0F	Aspect 4:3
C10	Aspect 16:9

The table right shows the typical com- mand lists for controlling this projector and please consult your local dealer for further information of another com- mands.

C1C	MENU ON
C1D	MENU OFF

PJLink Notice

This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all com- mands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.

Projector	PJLink
Input	Input	Parameter
Computer 1	RGB 1	11
YPbPr 1	RGB 2	12
SCART	RGB 3	13
Computer 2	RGB 4	14
YPbPr 2	RGB 5	15
Video	VIDEO 1	21
S-Video	VIDEO 2	22
HDMI	DIGITAL 1	31

PJLink is a registered trademark of JBMIA and pending trademark in

some countries.

60

English