User Controls

Security Setting Page

This page allow you control the projector by using the telnet or PJLink application installed on your computer.

New Password: Enter new password.

Confirm Password: Enter password again and submit.

Telnet Password Setting

Only a four-digit number is valid for the telnet password.

Theset. default Telnet Password as [0000], which means no password is

When you connect the projector to the network, it is recommended to set a new password.

If the password has been set on this Security Setting Page, the au- thentication is required to use the Telnet.

PJLink Password Setting

1 to 32 alphanumeric characters can be used for the password. The default PJLink Password is vacant, which means no password

is set.

38

English

Page 39
Image 39
Sanyo PDG-DXL100 owner manual Security Setting, Telnet Password Setting, PJLink Password Setting