Sanyo PLC-WXU700 Basic Operation Zoom and Focus Adjustment, Auto Setup Function, Top Control

Basic Operation

Zoom and Focus Adjustment

Rotate the Zoom  Lever to zoom in and out.

Rotate the Focus Ring to adjust the focus of the image.

Auto Setup Function

Auto setup function is provided to automatically execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu by just pressing the AUTO SETUP/CANCEL button on the top control or the AUTO SET/CANCEL button on the remote control. Refer to page 48 for the setting of the Auto setup function.

Note:

•Auto Keystone corrects vertical distortion only; it does not correct horizontal distortion.

•Auto Keystone cannot work when Ceiling feature is set to On in the Setting menu (p.53).

•Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion cannot be corrected properly by pressing the AUTO SETUP/CANCEL or AUTO SET/CANCEL button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu (p.49).

•Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.34-35).

Keystone Correction

If a projected picture still has keystone distortion after pressing the AUTO SETUP/CANCEL button on the top control or the AUTO SET/CANCEL button on the remote control, correct the image manually as follows:

Press the KEYSTONE button on the remote control. The Keystone dialog box appears. Use the Point ▲▼ buttons to correct keystone distortion. The keystone adjustment can be stored (see page 49).

Reduce the upper width	Reduce the lower width
with the Point ▲ button.	with the Point ▼ button.

Zoom Lever

Focus Ring

Top Control

AUTO SETUP/CANCEL button

POINT ▲▼buttons

Remote Control

KEYSTONE button

AUTO SET/CANCEL button

POINT ▲▼ buttons

•The white arrows indicate that there is no correction.

•A red arrow indicates the direction of correction.

•An arrow disappears at the maximum correction.

•If you press the KEYSTONE button on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled.

•The adjustable range is limited depending on the input signal.

26