Sanyo PLC-WXU700 Large , Middle or Small , Arrow , Finger or Dot and press, Standby mode, Setting

Setting

Pointer	Pointer
You can emphasize a part of the projected image with this
function. Use the Point ▲▼ buttons to choose Spotlight
(Large, Middle or Small) , Arrow, Finger or Dot and press
the SELECT button. See "Pointer Function" on page 14.

Arrow

Standby mode

This function is available when operating the projector via network.

Normal....... Supply the power to the network function even

after turning off the projector. You can turn on/ off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off.

Eco............. Select Eco when you do not use the projector

via network. The projector’s network function will stop when turning off the projector.

Refer to the owner’s manual of “Network Set-up and

Operation”.

Note:

•Factory default is Eco.

•When selecting Normal, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off.

54