Sanyo PLC-WXU700 owner manual HDMI setup, Ceiling, Rear, Sound, Terminal, Setting, Image

Setting

Ceiling

When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.

HDMI setup

This function is only used for HDMI input source.

Image

Normal: When the output of Digital R/G/B equipment is set to Standard.

Enhanced: When the output of Digital R/G/B equipment is set to Enhanced.

Sound

HDMI: When Digital input source is input, Sound is set to HDMI.

Computer 2: When DVI input source is changed to HDMI input source, Sound is set to Computer 2.

The names for the output setting of Digital R/G/B vary from equipment to equipment. For details, refer to the owner’s manual of your Digital R/G/B equipment.

When the black parts of the image are destroyed or stand out, please switch to Normal or Enhanced, and then switch the output type of the HDMI Digital R/G/B output equipment.

Terminal

The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer 2 input or monitor output. (See page 10)

Computer 2 . . . Computer input

Monitor out . . . Monitor out

Terminal function is not available when selecting Computer 2 to the input source. Change the input source to the others (HDMI or Computer 1 or Video) so that the Terminal function will be available. (pp.30-31, 40-41)

Ceiling

Rear

HDMI setup

53