Sanyo PLC-WXU700 owner manual Basic Operation Turning Off the Projector, Note

Basic Operation

Turning Off the Projector

1	Press the ON/STAND-BY button on the top control or
	on the remote control, and Power off? appears on the
	screen.
2	Press the ON/STAND-BY button again to turn off the
	projector. The POWER indicator starts to blink red, and
	the cooling fans keep running (You can select the level
	of fans’ quietness and speed. See "Fan" on page 61.).
		Power off? disappears after 4 seconds.
	At this time, you can unplug the AC power cord even if
	the fans are still running.
3	When the projector has cooled down enough, the
	POWER indicator stops blinking and you can turn on

the projector.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE

YOU TURN THE PROJECTOR ON, WAIT AT

LEAST FIVE MINUTES BEFORE TURNING IT

OFF.

DO NOT OPERATE THE PROJECTOR

CONTINUOUSLY WITHOUT REST. CONTINUOUS

USE MAY RESULT IN SHORTENING THE LAMP

LIFE. TURN OFF THE PROJECTOR AND LET

STAND FOR ABOUT AN HOUR IN EVERY 24

HOURS.

Note:

•When the On start function is set to On, the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.57).

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNING indicator blinks or lights red, see "WARNING indicator" on page 64.

•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.

•The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.

•The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal power-off processing for fan cooling is completed, compared with the time the AC power cord is immediately unplugged after the power- off.

23