HP C4580, C4599 manual Network troubleshooting, Solution 1 Turn on the Broadcast Ssid option

Models: C4580 C4599

1 261
Download 261 pages 11.49 Kb
Page 112
Image 112

To verify that the software is properly installed, double-click the HP Solution Center icon on the desktop. If the HP Solution Center shows the essential icons (Scan Picture and Scan Document), the software has been properly installed.

Network troubleshooting

This section addresses problems you might encounter setting up a network. Check the device display for specific error messages.

This section contains the following topics:

During wireless network setup you do not see the SSID (network name) displayed

Weak signal

Cannot connect to network during setup

Invalid WEP key during wireless setup

Invalid passphrase during wireless setup

The Printer Not Found screen appears during installation

Troubleshooting

During wireless network setup you do not see the SSID (network name) displayed

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Turn on the Broadcast SSID option

Solution 2: Establish a good signal between the product and wireless router (infrastructure) or computer (ad hoc)

Solution 3: Check if your network name (SSID) is at the bottom of the SSID list

Solution 4: Unplug the Ethernet cable

Solution 1: Turn on the Broadcast SSID option

Solution: Access the router's Embedded Web Server and turn on the Broadcast SSID option. See the user guide that came with your wireless router for information on how to access the Embedded Web Server and check the Broadcast SSID setting.

For more information, see:

Connect to an integrated wireless WLAN 802.11 network” on page 13

Network troubleshooting

109

Page 112
Image 112
HP C4580, C4599 manual Network troubleshooting, Solution 1 Turn on the Broadcast Ssid option