HP C4599, C4580 manual Ink-backup mode output, Exit ink-backup mode

Models: C4580 C4599

1 261
Download 261 pages 11.49 Kb
Page 89
Image 89

Chapter 11

Surface

Skin

White fabric

Color fabric

Remedy

Wash the area with an abrasive soap.

Wash the fabric in cold water and use chlorine bleach.

Wash the fabric in cold water and use sudsy ammonia.

CAUTION: Always use cold water to remove ink from fabric. Warm or hot water can set the ink into the fabric.

Ink-backup mode

Use the ink-backup mode to operate the HP All-in-One with only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. During ink-backup mode, the product can only print jobs from the computer. You cannot initiate a print job from the control panel (such as copying or printing from a memory card).

NOTE: When the HP All-in-One operates in ink-backup mode, a message is displayed on screen. If the message is displayed and two print cartridges are installed in the product, verify that the protective piece of plastic tape has been removed from each print cartridge. When plastic tape covers the print cartridge contacts, the product cannot detect that the print cartridge is installed.

For more information about ink-backup mode, see the following topics:

Ink-backup mode output

Exit ink-backup mode

Ink-backup mode output

Printing in ink-backup mode slows the HP All-in-One and affects the quality of printouts.

Installed print cartridge

Black print cartridge

Tri-color print cartridge

Photo print cartridge

Result

Colors print as grayscale.

Colors print but black is grayed and is not a true black.

Colors print as grayscale.

Maintain the

HP All -in

-One

NOTE: HP does not recommend using the photo print cartridge for ink-backup mode.

Exit ink-backup mode

Install two print cartridges in the HP All-in-One to exit ink-backup mode.

Related topics

Replace the print cartridges” on page 81

86 Maintain the HP All-in-One

Page 89
Image 89
HP C4599, C4580 manual Ink-backup mode output, Exit ink-backup mode