Chapter 10

Change the copy settings for the current job

You can customize the copy settings of the HP All-in-One to handle nearly any copy task. This section contains the following topics:

Make multiple copies of the same original

Change copy speed or quality

Make multiple copies of the same original

You can set the number of copies from the control panel of the HP All-in-One or from the HP Photosmart Software. This task explains how to set the number of copies from the control panel only.

NOTE: For information on initiating copies from the software, see the software portion of the HP Photosmart Software Help.

To make multiple copies of an original from the control panel

1.Load paper in the input tray.

2.Load your original print side down on the right front corner of the glass.

Use the copy features

3.Press Settings.

The Settings menu appears.

72 Use the copy features

Page 75
Image 75
HP C4599, C4580 manual Change the copy settings for the current job, Make multiple copies of the same original