HP C4599 Nothing happens when I try to copy, Solution 2 Place the original correctly on the glass

Models: C4580 C4599

1 261
Download 261 pages 11.49 Kb
Page 157
Image 157

Chapter 13

Resize to Fit is not working as expected

The image is cropped when I make a borderless copy

The printout is blank

A borderless copy has white space around the edges

Troubleshooting

Nothing happens when I try to copy

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Turn on the product

Solution 2: Place the original correctly on the glass

Solution 3: Wait until the product completes the current operation

Solution 4: The product does not support the paper or envelope

Solution 5: Clear the paper jam

Solution 1: Turn on the product

Solution: Look at the On button located on the product. If it is not lit, the product is turned off. Make sure the power cord is firmly connected to the product and plugged into a power outlet. Press the On button to turn on the product.

Cause: The product was turned off.

If this did not solve the issue, try the next solution.

Solution 2: Place the original correctly on the glass

Solution: Load the original print side down on the right front corner of the glass as shown below.

Cause: The original was placed incorrectly on the glass. If this did not solve the issue, try the next solution.

154 Troubleshooting

Page 157
Image 157
HP C4599, C4580 manual Nothing happens when I try to copy, Solution 2 Place the original correctly on the glass