HP C4580, C4599 manual Communication test failed, Solution 2 Connect the product to the computer

Models: C4580 C4599

1 261
Download 261 pages 11.49 Kb
Page 216
Image 216

Cause: The USB cable was not plugged in properly.

Communication test failed

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Turn on the product

Solution 2: Connect the product to the computer

Solution 1: Turn on the product

Solution: Look at the display on the product. If the display is blank and the On button is not lit, the product is turned off. Make sure the power cord is firmly connected to the product and plugged into a power outlet. Press the On button to turn on the product.

Cause: The product was turned off.

If this did not solve the issue, try the next solution.

Solution 2: Connect the product to the computer

Solution: If the product is not properly connected to the computer, communication errors can occur. Make sure the USB cable is securely connected to the product and the computer, as shown below.

Troubleshooting

Errors 213

Page 216
Image 216
HP C4580, C4599 manual Communication test failed, Solution 2 Connect the product to the computer