CAUTION: Be careful not to force the print cartridge carriage. If the carriage is stuck, forcing it to move will damage the printer.

Cause: The print carriage had stalled.

If this did not solve the issue, try the next solution.

Solution 4: Verify that the product is properly connected to a power source

Solution: Verify that the product is properly connected to a suitable power source.

To verify the product is connected to a suitable power source

1.Make sure that you are using the power cord provided with the product.

2.If the product is connected to a computer, make sure the computer has a grounded (three-prong) power plug.

3.Make sure the power cord is firmly connected to both the product and the power adaptor.

4.Plug the power cord directly into a power outlet.

Troubleshooting

1Power connection

2Power cord and adaptor

3Power outlet

5.Try to print from your computer.

If the product prints when plugged directly into a power outlet while disconnected from any power strips or surge suppressors, the power strip or surge suppressor might not be allowing sufficient voltage to reach the product.

6.If the product cannot print and the print carriage is still stalled, contact HP support for service.

Go to: www.hp.com/support.

If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.

Errors 217

Page 220
Image 220
HP C4580, C4599 manual Power connection Power cord and adaptor Power outlet