HP C4599 Product does not read the memory card, Solution 2 Remove the additional memory card

Models: C4580 C4599

1 261
Download 261 pages 11.49 Kb
Page 149
Image 149

Chapter 13

Solution 2: Remove the additional memory card

Solution: Remove one of the memory cards. You can use only one memory card at a time.

For more information, see:

Insert a memory card” on page 63

Cause: You had inserted more than one memory card.

Troubleshooting

The product does not read the memory card

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Insert the memory card properly

Solution 2: Insert the memory card fully into the appropriate slot on the product

Solution 3: Remove the additional memory card

Solution 4: Reformat the memory card in your digital camera

Solution 1: Insert the memory card properly

Solution: Turn the memory card so that the label faces up and the contacts are facing the product, and then push the card forward into the appropriate slot until the Photo light turns on.

If the memory card is not inserted properly, the product will not respond and the green Photo light (near the memory card slots) will blink rapidly.

After the memory card has been inserted properly, the Photo light will blink green for a few seconds, and then remain lit.

Cause: The memory card was inserted backwards or upside down. If this did not solve the issue, try the next solution.

Solution 2: Insert the memory card fully into the appropriate slot on the product

Solution: Make sure you fully insert the memory card into the appropriate slot on the product.

If the memory card is not inserted properly, the product will not respond and the green Photo light (near the memory card slots) will blink rapidly.

After the memory card has been inserted properly, the Photo light will blink green for a few seconds, and then remain lit.

Cause: The memory card was not fully inserted in the appropriate slot on the product.

If this did not solve the issue, try the next solution.

146 Troubleshooting

Page 149
Image 149
HP C4599, C4580 manual Product does not read the memory card, Solution 2 Remove the additional memory card