Solution 4: Check the status of the product in the HP Solution Center

Solution: Check the status of the product in the HP Solution Center.

To check the status of the product

1.On the Windows taskbar, click Start, Programs or All Programs, HP, HP Solution Center.

2.Verify that the product is listed in the Select Device area or that the appropriate tab is selected.

3.Click Status.

If the product is working properly, a message appears indicating your product is ready.

4.If you receive a Disconnected error message, then check whether there is another instance or another tab for the product with a copy number included, such as HP Photosmart C4500 All-in-One series 2.

5.Select the second instance of the product and repeat steps 2 through 4.

6.Try to scan again.

Cause: There might have been two instances of the product connected to the HP Solution Center.

If this did not solve the issue, try the next solution.

Solution 5: Check the power supply

Solution: Check the power supply.

To check the power supply

1.Make sure the power cord is firmly connected to both the product and the power adapter. Plug the power cord into a power outlet, surge protector, or power strip.

1Power connection

2Power cord and adapter

Troubleshooting

Errors 169

Page 172
Image 172
HP C4580, C4599 manual To check the status of the product, Solution 5 Check the power supply, To check the power supply