Manuals / Sanyo / Computer Equipment / Projector

Sanyo PLC-WXU700 Computer Input Auto PC adjustment, PC adjust Menu, Menu Operation, Note

Models: PLC-WXU700

1 85
Download 85 pages 27.87 Kb
Page 33
Image 33
Computer Input

Computer Input

Auto PC adjustment

Auto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V positions to conform to your computer.

Menu Operation

Auto PC adj..

1

Press the MENU button to display the On-Screen

Menu. Use the Point ▲▼ buttons to select PC adjust

 

and then press the Point ► or the SELECT button.

2

Use the Point ▲▼ buttons to select Auto PC adj.. and

then press the SELECT button.

To store adjustment parameters

The adjusted parameters from the Auto PC adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–5)in the PC System Menu (see page 32). See also Store on page 35.

Note:

•Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.34-35).

•The Auto PC adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected

in the PC System Menu (p.32), or when the signal is coming from the HDMI terminal.

PC adjust Menu

Use Point ▲▼ buttons to select Auto PC adj.. and press the SELECT button. Please wait.... . appears while the Auto PC

adjustment is in process.

33

Page 32 Page 34
Page 33
Image 33
Sanyo PLC-WXU700 Computer Input Auto PC adjustment, PC adjust Menu, To store adjustment parameters, Menu Operation, Note
Page 32 Page 34