The image is distorted or runs off, The screen, Appendix

Appendix

The image is distorted or runs off..

–Check PC adjustment or Screen and adjust them. See pages 34-35, 38-39 .

–PIN code lock is being set. Enter a PIN code ("1234" or numbers you have set). See pages 22, 59-60.

–Make sure your computer is connected to the projector with USB cable. See page 17.

–Check cable connection between the projector and your computer. See page 17.

The Remote Control does not work..	– Check the batteries.
	– Make sure no obstruction is between the projector and remote
	control.
	– Make sure you are not too far from the projector when using the
	remote control. Maximum operating range is 16.4'(5 m).
	– Make sure the code of the remote control is conformed to the
	projector’s code. See page 58.
	– Unlock the Key lock function for the remote control function. See
	page 59.
	– Check RESET/ON/ALL-OFF switch on the remote control is set to
	ON. See page 12.

Indicator blinks or lights..	– Check the status of the projector with referring to "Indicators and

	projector Condition". See page 75.

–Check the connection between the projector and your computer.

–Check the mouse setting on you computer.

–Make sure the mouse driver is installed on your computer, otherwise, the remote control can not be used as a wireless mouse.

–Make sure the signal is from the computer, otherwise, the remote control can not be used as a wireless mouse.

–Turn on the projector before turning on the computer.

The exclamation mark appears on	– Your operation is invalid. Operate correctly.
the screen..

Top control does not work..	– The top control is not available if the top control is locked at Key lock

	under Security of Setting section. See page 59.

Unable to unlock the Logo PIN code lock, Security key lock or Security PIN code lock..

–Contact the dealer where you purchased the projector or the service center.