Installation

Positioning the Projector

For projector positioning, see the figures below.

The projector should be set horizontally to the flat screen.

Note:

This projector is not equipped with optical zoom. To adjust the screen size, change the throw distance.

The brightness in the room has a great influence on picture quality.

It is recommended to limit the ambient lighting in order to get the best image.

The values below are approximate and may vary from the actual sizes.

A : B = 10 : 1.2

 

 

3.38' (1.03m)

 

 

 

 

 

 

 

(Inch Diagonal)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.28' (1.00m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

80”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.92' (0.89m)

 

 

78”

 

 

2.66' (0.81m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

70”

 

 

 

 

 

 

 

A

 

 

2.49' (0.76m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

64”

60”

B

(Center)

Screen Size

 

60”

 

64”

70”

78”

80”

(W x H) mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1219 x 914

 

1300 x 975

1422 x 1067

1585 x 1189

1626 x 1219

4 : 3 aspect ratio

 

 

 

 

 

 

 

 

 

 

Throw distance

 

2.49' (0.76m)

 

2.66' (0.81m)

2.92' (0.89m)

3.28' (1.00m)

3.38' (1.03m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjustable Feet

Projection angle can be adjusted up to 10.0 degrees with the adjustable feet.

1

Lift the front of the projector and pull upward the feet

 

lock latches on both sides of the projector.

2

Release the feet lock latches to lock the adjustable

 

feet and rotate the adjustable feet to adjust the

 

position and tilt.

3

To retract the adjustable feet, lift the front of the

projector and pull and undo the feet lock latches. Keystone distortion of the projected image can be corrected by menu operation. (pp. 23, 42)

Feet Lock Latches

Adjustable Feet

14