![](/images/backgrounds/112000/112000-689x1.png)
Rear Terminal
| q |
|
|
|
|
|
|
|
|
|
|
✽ | w |
| e |
| r |
| t |
| y | u |
|
|
|
|
|
| (VARIABLE) |
|
|
|
| COMPUTER IN 2 / | R | AUDIO OUT |
|
|
| COMPUTER IN 1 |
|
| |
RESET | USB | SERVICE PORT | MONITOR OUT |
|
| |
|
|
| / COMPONENT IN |
|
|
|
|
|
|
| VIDEO IN | L | COMPUTER / |
|
|
|
| (MONO) | COMPONENT | |
|
|
|
| AUDIO IN | ||
|
|
|
|
|
oi
In order to operate the computer with the remote control during a presentation, connect the USB port of the computer to the projector with a USB cable. (p. 16)
wSERVICE PORTThis jack is used to service the projector.
eCOMPUTER IN 1 / COMPONENT INConnect output signal from a computer, RGB scart
When the cable is of the longer variety, it is advisable to use this terminal and not COMPUTER IN 2 / MONITOR OUT.
rCOMPUTER IN 2 / MONITOR OUTThis terminal is switchable and can be used for input from a computer or output to the other monitor.
Set the terminal up as either Computer input or Monitor output properly. (Used for Monitor out, this terminal outputs only incoming signal from COMPUTER IN 1 / COMPONENT IN terminal.) (pp. 16, 45)
Connect the
Connect the audio output from video equipment connected to t or o to this jack. (When the audio output is monaural, connect it to L (MONO) jack.) (p. 17)
uAUDIO OUT(VARIABLE)Connect an external audio amplifier to this jack. (pp. 16- 18)
This terminal outputs sound from AUDIO IN terminal (y or i).
iCOMPUTER/ COMPONENT AUDIO INConnect the audio output (stereo) from a computer or video equipment connected to e or r to this jack. (p 16, 18)
oVIDEO INConnect the composite video output from video equipment to VIDEO jack. (p. 17)
✽RESET button
A
9