Appendix

Some displays are not seen

–Check the Display function. (See p. 42)

during the operation.

 

 

 

PIN code dialog box appears at start-up.

–PIN code lock is being set. Enter a PIN code (1234 or

 

numbers you have set). (See p. 19, 47, 48)

 

 

Computer 2 cannot be selected.

–Select Computer 2 at the Terminal function. (See p. 45)

 

 

The Terminal function cannot be selected.

–The Terminal function cannot be selected after Computer 2 is

 

selected. Select other input source such as Computer 1 or

 

Video with the COMPUTER button or the VIDEO button on

 

the remote control so that the Terminal function can be

 

selected.

 

 

The Remote Control does not work.

–Check the batteries.

 

–Make sure no obstruction is between the projector and the

 

remote control.

 

–Make sure you are not too far from the projector when using

 

the remote control. Maximum operating range is 16.4’ (5m).

 

–Make sure the code of the remote control is conformed to

 

the projector. (See p. 46)

 

 

Cooling fans are still running after

–This is normal condition. Fans keep running for a certain time

the AC plug is disconnected.

even after disconnecting the AC plug.

WARNING :

High voltages are used to operate this projector. Do not attempt to open the cabinet.

If problems still persist after following all operating instructions, contact the dealer where you purchased the

Appendix

projector or the service center. Give the model number and explain about the problem. We will advise you

how to obtain service.

 

The CE Mark is a Directive conformity mark of the European Community (EC).

Pixelworks ICs used.

59