Computer Input
Custom
Adjust the screen scale and position manually.
Press the SELECT button at Custom icon. "Custom" is displayed on the screen for a few seconds and then "Aspect" box appears.
Scale H / V .......Adjust the Horizontal / Vertical screen
scale.
H&V..................When selecting "On", the aspect ratio is
fixed. "Scale V" becomes gray and unselectable. Adjust "Scale H", then the screen scale is automatically modified based on the aspect ratio.
Position H / V ...Adjust the Horizontal / Vertical screen position.
Common ........Save the adjusted scale. Press the
SELECT button at "Common" to display the confirmation box. To save the scale, press the SELECT button at "Yes". When "Custom" is selected, the saved scale is used.
Reset ............Reset "Common" data. Press the
SELECT button at "Reset" to display the confirmation box. To reset, press the SELECT button at "Yes".
Press the SELECT button at "Common" or "Reset", to display confirmation box.
✔Note:
•When no signal is detected, Normal is set automatically and "Aspect" screen disappears.
•The adjustable range of Scale H/V and Position H/V can be limited depending on the input signal.
For zooming in and out the images
Digital zoom +
When the Digital zoom + is selected, the
A projected image can be also expanded by pressing the D.ZOOM ▲ button on the remote control.
Digital zoom –
When Digital zoom – is selected, the
A projected image can be also compressed by pressing the D.ZOOM ▼ button on the remote control.
To exit the Digital zoom +/– mode, press any button except the D.ZOOM ▲▼ buttons, SELECT, and Point button.
To return to the previous screen size, select a screen size in the Screen Size Adjustment or select an input source from the Input Source Selection (p. 26) again, or adjust the screen size with the D.ZOOM ▲▼ buttons.
Remote Control
POINT buttons
SELECT button
D.ZOOM + button
D.ZOOM - button
✔Note:
•The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. (p. 30)
•The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working.
•True, Full screen, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 27)
•Digital zoom +/- cannot be selected when Full screen or True is selected.
34