Basic Operation
Turning On the Projector
1
2
3 Press the POWER
4 After the countdown, the input source that was selected last and the Lamp mode status icon (see p. 46) appear on the screen.
If the projector is locked with a PIN code, PIN code Input Dialog Box appear. Enter the PIN code as instructed below.
16
The preparation display disappears after 30 seconds.
Selected Input Source and Lamp Mode
Lamp mode
(See p. 46 for Lamp mode)
Installation
Enter a PIN code
Select a number by pressing the Point 7 8 buttons and fix the number with the SELECT button. The number changes to "✳". If you fixed an incorrect number, move the pointer to "Set" or "Clear" once by pressing the Point d button, then return to "PIN code". Enter the correct number again.
Repeat this step to complete entering a
When the
If you entered an incorrect PIN code, "PIN code" and the number (✳✳✳✳) turn red and disappear. Enter the correct PIN code all over again.
What is PIN code?
PIN code is a security code using Personal Identification Number that allows the person who knows it to operate the projector. Setting PIN code prevents others except the specific users from operating the projector.
A PIN code consists of a
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer be started. Set a new PIN code with special care, take a memo and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center.
PIN Code Input Dialog Box
Pointer
After the OK icon disappears, you can operate the projector.
✔Note:
•When the Logo select function is "Off", the logo is not shown on the screen. (p. 43)
•When the "Countdown off" or "Off" is selected in the Display function, the countdown is not shown on the screen. (p. 42)
•During the countdown period, all operations are invalid.
•If the correct PIN code number is not entered for 3 minutes after the PIN code dialog box appeared, the projector is turned off automatically.
19