Setting
Setting
This projector has Setting menu that allows you to set up the other various functions described as follows;
1 | Press the MENU button | to display the |
| Menu. Press the Point 7 | 8 buttons to move the red |
| framed pointer to the Setting Menu icon. | |
2 | Press the Point ed buttons to move the red framed | |
| pointer to the item that you want to set and then press |
the SELECT button. The Setting dialog box appears.
LanguageThe language used in the
This function corrects distortion of a projected image. Select either Store or Reset with the Point 78buttons, and then press the SELECT button. The keystone dialog box appears. Correct keystone with the Point ed buttons.
(p. 23)
Store .........Store the keystone correction even when the
AC power cord is unplugged.
Reset........Reset the keystone correction when the AC
power cord is unplugged.
Blue backPress the Point 7 8 buttons to switch on/off. When this function is “On,” a blue image is displayed while the input signal is not detected.
DisplayPress the Point 7 8 buttons to switch on/off. This function decides to display
On ......................... | Display all the |
| this function when you want to project |
| images after the lamp becomes bright |
| enough. This mode is set as a default.. |
Countdown off...... | Display the input image instead of the |
| countdown when turning on the |
| projector. Use this function when you |
| want to project the image as early as |
| possible even when the lamp is not |
| bright enough. |
Off ................... | Do not show |
| except; |
●
●“Power off?"
●
●“No signal” for Power management item (p. 45)
●”Please wait...”
●White arrows for panning mode (pp. 33, 34)
Set the red framed | Setting Menu |
pointer to the item | icon |
and press the |
|
SELECT button. |
|
Press the SELECT button at Language item, the
SELECT Language Menu appears. button
Press the SELECT button at this item to display the other languages.
Press the SELECT button at this item to close the dialog box.
42