Basic Operation

Turning Off the Projector

1

2

Press the POWER ON-OFF button on the remote control, and "Power off?" appears on the screen.

Press the POWER ON-OFF button again to turn off the projector. The POWER indicator starts to blink red, and

the cooling fans keep operating. (You can select the level of fan quietness and rotation speed. See p. 49.) At this time you can disconnect the AC power cord

 

even if the fans are still running.

The message disappears after 4 seconds.

3

When the projector has cooled down enough to be

 

 

turned on again, the POWER indicator becomes red.

 

TO MAINTAIN THE LIFE OF THE LAMP, ONCE

YOU TURN THE PROJECTOR ON, WAIT AT

LEAST 5 MINUTES BEFORE TURNING IT OFF.

✔Note:

•When the On start function is "On", this projector is turned on automatically by connecting the AC power cord to an AC outlet.

(p. 46)

•Do not operate the projector continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and give it a rest about an hour in every 24 hours.

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNING indicator blinks or emits a red light, see "Warning Indicator" on p. 53.

•While the POWER indicator is blinking, lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator becomes red to be turned on again.

20