Computer Input
Input Source Selection
Direct Operation
Select either Computer 1 or Computer 2 by pressing the COMPUTER button on the remote control.
Before using COMPUTER button, select the correct input source through Menu operation as described below.
Menu Operation
1 | Press the MENU button to display the |
| Menu. Press the Point 7 8 buttons to move the red |
| framed pointer to the Input Menu icon. |
2 | Press the Point ed buttons to move the red arrow |
| pointer to either Computer 1 or Computer 2, and then |
| press the SELECT button. |
3 | After the Source Select Menu appeared for Computer |
| 1, move the pointer to RGB and then press the |
SELECT button.
✔Note:
•Computer 2 is not displayed when the COMPUTER IN 2/MONITOR OUT terminal is set as Monitor out. (p. 45)
•Computer 2 (COMPUTER IN 2 / MONITOR OUT) can accept only RGB signal.
Remote Control
COMPUTER button
COMPUTER button
Computer 1
Computer 2
Input Menu icon
Input MenuMove the pointer (red arrow) to Computer 1 and press the SELECT button.
Computer
1
Source Select MenuMove the pointer to RGB and press the SELECT button.
Input Menu
Move the pointer (red arrow) to Computer 2 and press the SELECT button.
26