Sanyo PLC-XU45 service manual Lamp Ballast Unit removal, Filter Board removal, Filter board

Mechanical Disassemblies

bLamp Ballast Unit removal

1 Remove 1 screw A (M3x4) and remove SW902, and then remove 1 screw B (M3x6) and disconnect the Lamp Socket.

2 Remove 2 screws C (M3x6) to take the Lamp Ballast ass’y upward off.

3 Remove 2 screws D (T2x6) to take the isolation sheet off.

4 Remove 4 screws E (T3x6) to take the lamp ballast board off.

D
D	E	C
	E
E
Isolation sheet
E		B
Lamp ballast board		A
SW902

nFilter Board removal

C

Lamp ballast socket

Fig.5

1 Remove 3 screws A (M3x6) and pull the Filter Board ass’y upward.

2 Remove 1 screw B (M4x8) to take the grounding lead from the cabinet bottom. 3 Remove 4 screws C (T3x8) to take the Filter Board off.

	C
	A
A	C	C	Filter board

C

A

B

Fig.6

-10-