Sanyo PLC-XU45 service manual Mechanical Disassemblies, Cabinet Top and Control Panel removal

■Mechanical Disassemblies

Mechanical disassemble should be made following procedures in numerical order. Following steps show the basic procedures, therefore unnecessary step may be ignored.

Caution:

The parts and screws should be placed exactly the same position as the original otherwise it may cause loss of performance and product safety.

zCabinet Top and Control Panel removal

1 Remove 4 screws A (M3x6) to take the Cabinet Top Ass’y upward off.

2 Remove the Control Panel off from the Cabinet Top by lifting the edge of control panel.

Control panel A

A

A

xMain Board removal

1 Remove 8 screws (M3x6) to take the Main Board upward off.

Screws Expression (Type Diameter x Length) mm

T type M Type

Cabinet top

A

Fig.1

Main Board

Fig.2

-8-