Sanyo PLC-XU45 service manual Optical Parts Disassemblies, Projection Lens removal

■Optical Parts Disassemblies

Before taking this procedure, remove Cabinet Top and Main Board following to the “Mechanical Disassemblies”. Disassembly requires a 2.0mm hex wrench and a screwdriver.

zProjection Lens removal

1 Remove the Front Panel following to “Front Panel Removal” on “Mechanical Disassemblies”.

2 Remove 4 screws (M3x10) to take the Projection Lens ass’y off.

Fig.1

xIntegrator Lens-In disassembly

1 Remove 2 screws A (M2.5x6) and pull the Integrator Lens-In ass’y upward. 2 Remove 1 stoppers B and then take the Lens off from the holder.

A

A

Stopper B

Integrator Lens

	* Lens should be placed as the
	rugged surface side comes to	Fig.2-2
Fig.2-1	the holder side.

-14-