-15-
Optical Pats Disassemblies
1Remove 2 screws A(M2.5x6) and pull the Condenser Lens ass’y upward.
2Remove 4 screws B(M2x4) to take the Lens off from the holder.
1Remove 2 screws A(M2.5x6) and pull the Condenser Lens-Out ass’y
upward.
2Remove 2 screws B(M2x4) to take the Lens off from the holder.
Note:
Should be place the lens as shown in the figure.
A
BCondenser Lens
Fig.3-2
Fig.3-1
* Lens should be placed as the flat
surface side comes to the holder
side.
Holder
A
A
Fig.4-2
Fig.4-1
B
B
Holder
Condenser Lens-Out
A
cCondenser lens disassembly
vCondenser Lens-Out disassembly
B
B
B
Side View