Sanyo PLC-XU45 service manual Relay Lens-Out disassembly, Polarized Glass-In removal, Holder

Optical Parts Disassemblies

bRelay Lens-Out disassembly

1 Remove 2 screws A (M2.5x6) and pull the Relay Lens-Out ass’y upward. 2 Remove 2 screws B (M2x4) to take the Lens off from the holder.

Note:

There is no mounting direction of the lens.

A

A	B
	Holder
	B

Relay Lens-Out

Fig.5-2

Fig.5-1

nPolarized Glass-In removal

1 Remove each screw (M2.5x6) and pull the Polarized Glass-In ass’y upward.

2 Unhook the stoppers and take the glass off upward.

Phase Sheet

Polarized Glass-In

Hooks

* Should be places the glass as the

film attached side comes to the Fig.6-2prism side.

Fig.6-1

-16-