
Basic Operation
Turning On the Projector
1
2 Connect the projector's AC power cord into an AC outlet and open the front cover. Turn the Main On / Off switch on, and the POWER indicator flashes red in a moment and turns on red. (If the front cover is being closed, the POWER indicator light orange.)
Open the front cover.
Main On/Off switch
3 | Press the POWER |
| remote control. The POWER indicator turns green, and the |
| cooling fans start to operate. The preparation display appears on |
| the screen and the count down starts. (A captured image can |
| be used as the preparation display. See “Capture” on page 42.) |
4 | After the |
| and the Lamp mode status icon appear on the screen. |
OFFON
Selected Input Source and Lamp Mode
Lamp mode
(See page 29, 39 for Lamp mode.)
Turning Off the Projector
1 | Press the POWER |
|
|
|
|
|
| remote control, and a message "Power off?" appears on the |
|
|
|
|
|
| screen. The message is not displayed and the projector is |
|
|
|
|
|
| turned off when the Power off confirmation function is off. (See |
|
|
|
|
|
| the Setting Menu on page 43.) |
|
|
|
|
|
2 | Press the POWER |
|
|
|
|
|
| projector. The POWER indicator starts to flash red, and it |
|
|
|
|
|
| continues while the cooling fans are operating (for about 60 | The message disappears after 4 seconds. | ||||
| seconds). |
|
|
|
|
|
3 | When the projector has cooled down enough to be turned on |
|
|
|
|
|
again, the POWER indicator lights red. Then you can turn the Main On/Off switch off and disconnect the AC power cord.
TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN
PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE
TURNING IT OFF.
DO NOT DISCONNECT AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE POWER
INDICATOR LIGHTS RED. OTHERWISE IT WILL RESULT
IN SHORTENING LAMP LIFE.
NOTE
●When the front cover is closed during operation, the projector is automatically turned off in 5 seconds for safety. Be sure to turn off the projector by pressing the POWER
●The projector cannot be turned on during the cooling period with the POWER indicator flashing red. You can turn it on again after the POWER indicator lights red.
●Do not use the projector for more than 24 hours continuously. Turn off the projector at least once in 24 hours and give it a rest. Continuous use may result in shortening the lamp lifetime.
●This projector monitors internal temperature and automatically controls the running speed of the cooling fans.
●If the WARNING indicator flashes or lights red, see “Warning Indicator” on page 45.
19