
Setting
Setting
1 | Select the Setting Menu with the Point Up/Down button, and |
| then press the Point Right button to enter the |
2 | Select an item with the Point Up/Down button to set various |
| settings. |
Language
The language used in the
Keystone
When the image is distorted vertically, select the Keystone. The On- Screen Menu disappears and the Keystone dialog box is displayed. Correct keystone distortion by pressing the Point Up/Down button. Refer to Keystone Adjustment on page 21.
Blue back
When this function is “On,” the projector produces a blue image while input signal is not detected.
Display
This function decides whether to display
Off ···· does not show
●
●“Power off?” message
●“No signal” message
●”Wait a moment!” message
Background color
This function is used to change the color of background in the On- Screen Menu.
.......Default background color
.......Background color is grayish and half transparent.
.......Background color is blackish and half transparent.
.......Background color is transparent.
Menu position
This function is used to change the position of the
NOTE
●While selecting Keystone, press RESET button then the adjustment goes back to the factory default setting.
Setting Menu (Language)
This arrow indicates that there are other items. Select this item and press the Point Down button to go to the next item.
After selecting a language, move the pointer to this icon, and press the SELECT button to activate it.
Menu position
41