Computer Input
Display area
Select the resolution at the Display area dialog box.
Display area H
Adjusts the horizontal area displayed by this projector. Press the Point Left/Right button to decrease/increase value.
Display area V
Adjusts the vertical area displayed by this projector. Press the Point Left/Right button to decrease/increase value.
Reset
Resets adjustments to their factory default settings.
Mode free
To clear adjustment data previously set, select Mode free and press the Point Right button. A dialog box will appear and choose one of 5 modes and then press the SELECT button.
Store
To store adjustment data, select Store and press the Point Right button. A dialog box will appear and choose one of 5 modes and then press the SELECT button.
Direct Operation with Remote control
Pressing the RESET button on the remote control, adjustments will reset to their factory settings.
NOTE
●Display area, and Display area (H/V), cannot be selected when “480i”, “575i”, “480p”, “575p”, “720p(HDTV)”, “1035i(HDTV)”, or “1080i”(HDTV) is selected in the PC System Menu (p33).
Select Store to store adjustment data.
To clear adjustment data
Closes this dialog box.
To store adjustment data
This Mode has parameters being stored.
Vacant Mode | Shows values of “Total dots,” | |
|
| |
|
| “Horizontal,” “Vertical,” |
|
| “Display area H,” and “Display |
|
| area V.” |
|
|
|
| RESET button |
|
|
|
|
LIGHTLL
RESET
MENUCANCEL
SELECT
36