Computer Input

Computer Adjustment (Manual)

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. This projector has Manual PC Adjustment to enable you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it.

1

Select the PC Adjust Menu with the Point Up/Down button, and

 

then press the Point Right button to enter the sub-menu.

2

Select an item with the Point Up/Down button and press the

 

Point Left/Right button to adjust each item.

Fine sync

Adjusts an image as necessary to eliminate flicker from the display. Press the Point Left/Right button to adjust value. (From 0 to 31)

Total dots

Adjusts the number of total dots in one horizontal period. Press the Point Left/Right button and adjust number to match your PC image.

Horizontal

Adjusts horizontal picture position. Press the Point Left/Right button to adjust the position.

Vertical

Adjusts vertical picture position. Press the Point Left/Right button to adjust the position.

Current mode

Press the Point Right button to show the information of the connected computer.

Clamp

Adjusts clamp level. When the image has dark bars, try this adjustment.

PC Adjust Menu

 

Shows status

Selected Mode

(Stored / Free) of the

selected Mode.

 

This arrow indicates that there are other items. Select this item and press the Point Down button to go to the next item.

Press the SELECT button to adjust the next item.

Press the MENU button to return to the previous On- Screen Menu and store the adjusted value.

Go on to the next page...

35