Setting
Advanced menu
When this function is On, Advanced menu in Image level adjustment (both Video and computer input) can be selected. See Image level adjustment (p.29,39) for details.
Logo
This function decides what to be displayed when starting up.
Off | ···· |
Default | ···· the |
User | ···· the image you captured |
Capture
This function is used to capture the image being projected and use it for a
To capture the image, select [Yes]. To cancel the Capture function, select [No]. To stop capturing in the middle, press CANCEL button.
| Mounting |
This function is used to select the way of setting the projector. | |
Off | ···· Cancels the selected way of setting |
Ceiling | ···· Used to project the image from a ceiling mounting the |
| projector. The picture is top/bottom and left/right |
| reversed. |
Wall | ···· Used to project the image from a |
| The picture is top/bottom reversed. |
Rear
When this function is “On,” the picture is left/right reversed. This function is used to project the image to a rear projection screen.
Capture
Mounting
Ceiling
Wall
Rear
NOTE
●A signal from a computer can be captured up to XGA(1024 x 768). If selecting 1280 x 1024 at Display area in the PC Adjust Menu (p36), then the image cannot be captured.
●A signal from video equipment can be captured except for 720p, 1035i, 1080i.
●When capturing the image that has been adjusted by the Keystone function, the adjustment data is automatically reset and the projector captures an image without keystone adjustment.
●If the Capture function fails to capture an image or cancel to capture in the middle, the
●If capturing a signal which is not able to be captured, an exclamation mark appears and the function will not be available.
●When you change the Image Level, the Image Level of MY PICTURE also changes from which it was captured .
42