Video Input

Image Level Adjustment

1

Select the Image Adjust Menu with the Point Up/Down button,

 

and then press the Point Right button to enter the sub-menu.

2

Select an item with the Point Up/Down button and press the

 

Point Left/Right button to adjust the item.

Contrast

Press the Point Left button to decrease contrast and the Point Right button to increase contrast. (From -31 to +31)

Brightness

Press the Point Left button to adjust image darker and the Point Right button to adjust image brighter. (From -31 to +31)

Color

Press the Point Left button to lighten color and the Point Right button to deepen color. (From -31 to +31)

Tint

Press the Point Left/Right button to obtain proper color. (From -31 to +31)

Color temp.

Press the Point Left/Right button for Color temperature level that you want to select. (High, Mid, Low1, Low2, Low3)

White balance (Red)

Press the Point Left button to lighten red tone and the Point Right button to deepen red tone. (From -31 to +31)

White balance (Green)

Press the Point Left button to lighten green tone and the Point Right button to deepen green tone. (From -31 to +31)

White balance (Blue)

Press the Point Left button to lighten blue tone and the Point Right button to deepen blue tone. (From -31 to +31)

Sharpness

Press the Point Left button to soften the image and the Point Right button to sharpen the image. (From -7 to +7)

Gamma

Press the Point Left/Right button to obtain better balance of contrast. (From -7 to +7)

NOTE

●Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N except for 575i.

●Color and Tint cannot be selected when the input source is HDMI.

●After adjusting any of the White balance Red, Green or Blue, the Color temp. display will change to "User".

Image Adjust Menu

The level being selected

This arrow indicates that there are other items. Select this item and press the Point Down button to go to the next item.

Press the SELECT button or Point Up/Down button to adjust the next item.

Press the MENU button to return to the previous On- Screen Menu and store the adjusted value.

Go on to the next page...

Direct Operation with Remote control

You can adjust the items in the Image Level Adjustment menu with pressing the IMAGE ADJ. button on the remote control. Press Point Left/Right button to adjust each item. Press Up/Down button to get to the next item.

MENUCANCEL

SELECT

SCREEN

IMAGE ADJ.

IMAGE ADJ. button

28