NORMAL RECORDING

Action to Take when the Video Signal Deteriorates

If there is no video signal during recording, fast forward, rewind modes, when in stop mode or when a tape is not loaded the menus are not displayed, “VIDEO LOSS” can be displayed on-screen and a signal (0 V) can be output at the ALARM OUT terminal. If in the (SET UP 5) menu “WARN.OUT” is set to “V.LOSS” or “T OR V”, a signal (0V) will output at the WARNING OUT terminal.

If in the (SET UP 3) menu, in the BUZZER section WARNING is set to “Y”, the buzzer will be heard. To stop the buzzer, press the STOP button.

1Press the MENU button until the (SET UP 4) menu is displayed.

@@@@@@@<SET@UP@4>

öALARM@MODE@@@@@@Y

öALARM@DURATION@@20S

öVIDEO@LOSS@@@@@@N

2Press the ] button, until the “VIDEO LOSS” setting is flashing.

3Press the l (or j) button, to set the desired mode.

N. . . . . . . . . . The video loss warning is not active.

Y . . . . . . . . . . The video loss warning is active.

4Press the PAUSE/SEARCH button to save the setting.

Tape Counter Notes:

•There is no tape counter indication for the blank portions of the tape.

•The tape counter indicates real hours, minutes and seconds.

•There may be a slight discrepancy between the position shown on the tape counter and the actual tape position.

•When rewinding the tape past the “0:00:00” position, a minus (–) sign will be displayed.

•When the counter is displayed on the digital display panel, press the COUNTER RESET button to reset it to 0:00:00.

English

13