VCR No.2
•
To
VIDEO OUT jack
ALARMSERIES OUT/ SERIES SW EJECT
OUT IN COM NON REC OUT IN OUT OUT IN
To VIDEO OUT jack (VCR)
To
VIDEO IN jack
• The counter must start from the beginning of tape, or the series recording out will not function properly.
• Even if “OFF” is displayed, series recording will be conducted if there is an input at the SERIES IN terminal.
Monitor TV
If in the (SET UP 2) menu “SERIES REC IN” is set to “N” or “OUTPUT” is set to “NON REC”, series recording will not be possible.
The SERIES OUT signal will be presence either at the point when the counter reading is 7:57:00 or when VCR No. 1 reaches the end of the tape, whichever is first. The signal will stop 70 seconds after the tape end point of VCR No. 1.
When this signal is received by VCR No. 2, it will start recording. During the period when the SERIES OUT signal is being received by VCR No. 2, if the STOP button of VCR No. 2 is accidentally pressed, VCR No. 2 will go into the stop mode for an instant and then return to the record mode.
To prevent this form occuring, the security lock of VCR No. 2 should be set to the on condition.
If TAPE END MODE is set to “REW”, when the end of the tape is reached “OFF” is displayed, the tape is rewound then stop. (TAPE END indicator will flash until the EJECT, FF, REW, PLAY or REC button is pressed.).
NOTES:
• If the counter reading on VCR No.1 is 7:57:00 or more, when the REC button is pressed (step 3), the recording will start on VCR No.2.
SERIES RECORDING
Using 2 VCRs or more, the series recording function lets you switch recording from one unit to the next (only with VCRs of the same model as this one).
NOTE:
•T-160 must be used for proper serial out operation.
Series Recording Setup
1Connect 2 VCRs or more as illustrated below.
2Set the following items as indicated.
| Item | VCR No.1 | VCR No.2 |
| | | and on |
| Cassette tape | Loaded | Loaded |
| | | |
| Operation mode | Stop | Stop |
| | | |
| “TAPE END MODE” (in | REW or | REW or |
| (SET UP 2) menu) | STOP | STOP |
| | | |
| “OUTPUT” (in (SET UP | SERIES | SERIES |
| 2) menu) |
| | |
| | | |
| “SERIES REC IN” (in | Y (YES) | Y (YES) |
| (SET UP 2) menu) |
| | |
| | | |
| Security lock | Canceled | Set |
| | | |
3Press the REC button on VCR No.1.
°Recording will start in series recording mode.
4Set the security lock on VCR No.1.
Series recording connections
Video camera
| | | | | | To |
VCR No.1 | | | | | | VIDEO IN |
| | | | | jack |
ALARM | SERIES OUT/ SERIES SW | EJECT | |
OUT | IN COM | NON REC OUT | IN | OUT | OUT | IN |
WARNING TAPE | RS485 | | | RS485 | |
OUT | END OUT COM | A | B | COM | A | B |
To COM
terminalTo
VIDEO OUT jack
To
SERIES OUT terminal
WARNING | TAPE | | RS485 | | | RS485 |
OUT | END OUT COM | A | B | COM | A | B |
To COM terminal
To
SERIES OUT terminal
To VIDEO IN jack (VCR No. 3)
To
SERIES IN terminal
To SERIES IN terminal (VCR No. 3)
To COM terminal (VCR No. 3)