NORMAL PLAYBACK

Normal Playback

1Turn on the power to the VCR and TV monitor.

2Load the video cassette tape.

3Press the PLAY button.

°Playback starts.

°If necessary, adjust the tracking to eliminate the noise from the picture.

4To stop playback, press the STOP button.

°To advance or rewind the tape, press the FF or REW button.

NOTES:

•If a tape recorded in SP mode on a standard VCR is loaded, playback will be done in 2-hour mode.

•A tape recorded on other VCRs produced by another manufacturer may not be played back with the same degree of clarity on this unit.

Tracking Control

If there is noise in the image during playback,

1While looking at the playback picture, press and hold the TRACKING/V. STILL + button to minimize the noise.

2If it cannot be minimized, press the TRACKING/V. STILL – button.

Vertical Lock Control

During still image mode,

1Press and hold the TRACKING/V. STILL + button to reduce the vertical rolling of the image.

2If it cannot be corrected, press the TRACKING/V. STILL – button.

20

English