SPECIAL PLAYBACK

Picture Search (Forward and Reverse)

1Press the FF (or REW) button, during normal playback.

°The image can be seen while the tape is advanced (or rewound) at high speed.

2To return to normal playback, press the PLAY button.

NOTES:

•During picture search, noise (horizontal bars) will appear in the picture.

•The sound is muted.

Still Image

1Press the PAUSE/SEARCH button, during normal playback.

°A still image can be viewed.

2To return to normal playback, press the PLAY button.

NOTES:

•If still mode continues for 5 minutes or more, the VCR will go into stop mode to avoid damaging the tape.

•If the image is unstable (rolling vertically), adjust the vertical lock control to correct.

Frame Advance

1Press the FF button, during still image mode.

°The still image is advanced of one image (field).

2To return to normal playback, press the PLAY button.

NOTE:

•If frame advance mode continues for 5 minutes or more, the VCR will go into stop mode to avoid damageing the tape.

Day/Time Search

1Press the PAUSE/SEARCH button three times during stop mode.

°“T/D SEARCH 01 00:00” will be displayed on screen.

1H22M33S

T/D@SEARCH

01@@00:00

DAY@TIME

2Press the l (or j) button to set the desired day, then press the « button.

3Press the l (or j) button to set the desired hour, then press the « button.

4Press the l (or j) button to set the desired minutes.

NOTES:

•The setting can be made in 10 minutes increments only.

•For recordings made on other VCRs, the exact time may not be found even if the minutes are entered. For tapes recorded on older models of VCRs produced by this company (the ones without a minutes setting for the day/time search function), make sure to set the minutes to “00”.

5Press the FF (or REW) button.

°The desired day/time is searched and a still image of the recording will appear on-screen.

6Press the PLAY button.

°Playback will start.

NOTES:

•If during a search the end of the tape is reached, the tape will rewind and stop. If the beginning of the tape is reached, it will stop.

•The alarm and day/time data are recorded on the tape in a similar format. If they overlap, the alarm data will have the priority. Therefore, when searching for a day/time when an alarm recording was done, the day/time search will not stop at the desired location. In such a case, use alarm scan to find the desired recording location.

English

21