PROGRAM TIMER RECORDING

NOTES:

•

•

•

During timer recording or timer recording stand-by, all the buttons on the VCR, except the TIMER button and the buttons to set/cancel the security lock (see page 35), are disabled.

If the power fails, the recording will be interrupted. When the power is restored, the recording will resume if the stop time has not yet been reached, and “P” will be displayed on the digital display. The VCR internal battery is completely recharged after the VCR has been connected to a live outlet for 48 hours, and it will maintain all the VCR settings memory for up to 30 days.

Set the timer recordings so that the recording times do not overlap. If they do, the one with the earliest recording start time will have priority. (See chart below.)

 

7:00PM

 

8:00PM

 

9:00PM

10:00PM

Program 1

Program 2

Program 3

These portions will not be recorded

•To set two or more timer recordings for a same day of the week, press the * (or ]) button, until the day of the

week for the second recording is flashing, then press the l (or j) button, to set the desired day of the week.

•If no timer recording is set or a cassette without erasure-prevention tab is loaded, when the TIMER button is pressed the timer recording indicator “n” will start flashing and a buzzer will be heard.

•If “OFF” is displayed on the digital display, timer recording is not possible in order to prevent the recorded tape to be recorded over.

30

English