A minimum of 2 units are required for continuous loop recording.
Example with 2 VCRs.
Under loop recording when the recording finishes on the first unit, the new recording will start on the second unit. When the recording finishes on the second unit, recording will start on the first unit.
1The SERIES OUT/CLOCK OUT terminal of VCR No.2 and the SERIES IN terminal No.1 should be connected (See diagram).
2Set the following items as indicated.
Item | VCR No.1 | VCR No.2 | |
Cassette tape | Loaded | Loaded | |
|
|
| |
Operation mode | Stop | Stop | |
|
|
| |
“TAPE END MODE” (in | REW | REW | |
(SET UP 3) menu) | |||
|
| ||
|
|
| |
“SERIES REC IN” (in | Y (YES) | Y (YES) | |
(SET UP 3) menu) | |||
|
| ||
|
|
| |
“OUTPUT” (in (SET UP | SERIES | SERIES | |
5) menu) | |||
|
| ||
|
|
| |
Security lock | Canceled | Set | |
|
|
|
3Press the REC button on VCR No.1.
°Recording will start in series recording mode.
4Set the security lock on VCR No.1.
Loop recording connection (example with 2 VCRs)NOTES:
•To avoid recording problems, the “TAPE END MODE” in (SET UP 3) menu should be set to “REW” for both units.
•In loop recording mode, the tape will be
ALARM IN/
CLOCK IN COM