Sanyo SRT-2400 SERIES RECORDING, Series Recording Setup, REC, REC, Item, STOP, and on, NOTES:, VCR No.1, VCR No.2, SERIES IN, REC/PLAY SPEED CHANGE

SERIES RECORDING

Using 2 VCRs or more, the series recording function lets you switch recording from one unit to the next (only with VCRs of the same model as this one).

Series Recording Setup

•Connect 2 VCRs or more as illustrated below.

•Select the “TAPE” setting in the (SET UP 3) menu according to the type of the tape used.

1Press the REC/PLAY SPEED CHANGE button to set the recording speed mode.

2Set the following items as indicated.

Item	VCR No.1	VCR No.2
		and on
Cassette tape	Loaded	Loaded
Operation mode	Stop	Stop
“TAPE END MODE” (in	REW, STOP	REW, STOP
(SET UP 3) menu)	or EJECT	or EJECT
“SERIES REC IN” (in	Y (YES)	Y (YES)
(SET UP 3) menu)
“OUTPUT” (in (SET UP	SERIES	SERIES
5) menu)
Security lock	Canceled	Set

3Press the REC button on VCR No.1.

°Recording will start in series recording mode.

4Set the security lock on VCR No.1.

Series recording connections

Video camera

		To
VCR No.1		VIDEO IN
		jack
ALARM OUT/ ALARM IN/	SERIES OUT/ SERIES SW	EJECT
CLOCK OUT CLOCK IN COM	NON REC OUT IN OUT	OUT IN
WARNING TAPE
OUT END OUT COM	COM

To COM

terminalTo

VIDEO OUT jack

To

SERIES OUT terminal

The SERIES OUT signal will be presence either at the point when the counter reading is 7:57:00 or when VCR No. 1 reaches the end of the tape, whichever is first. The signal will stop 70 seconds after the tape end point of VCR No. 1.

When this signal is received by VCR No. 2, it will start recording. During the period when the SERIES OUT signal is being received by VCR No. 2, if the STOP button of VCR No. 2 is accidentally pressed, VCR No. 2 will go into the stop mode for an instant and then return to the record mode.

To prevent this form occuring, the security lock of VCR No. 2 should be set to the on condition.

If TAPE END MODE is set to “REW”, when the end of the tape is reached “OFF” is displayed, the tape is rewound then stop.

NOTES:

•If the counter reading on VCR No.1 is 7:57:00 or more, when the REC button is pressed (step 3), the recording will start on VCR No.2.

•If in the (SET UP 3) menu “SERIES REC IN” is set to “N” or in the (SET UP 5) menu “OUTPUT” is set to “NON REC”, series recording will not be possible.

•Even if “OFF” is displayed, series recording will be conducted if there is an input at the SERIES IN terminal.

Monitor TV
		To VIDEO OUT jack
		(VCR)
		To
VCR No.2		VIDEO IN
		jack
ALARM OUT/ ALARM IN/	SERIES OUT/ SERIES SW	EJECT
CLOCK OUT CLOCK IN COM	NON REC OUT IN OUT	OUT IN
WARNING TAPE
OUT END OUT COM	COM
To COM
terminal		To
To		VIDEO OUT
		jack
SERIES OUT
terminal

To VIDEO IN jack (VCR No. 3)

To

SERIES IN terminal

To SERIES IN terminal (VCR No. 3)

To COM terminal (VCR No. 3)

English 31